Welcome to Mouldco - Melbourne's Mould Removal Experts
We are mould remediation experts based in Melbourne. Contact us by telephoning 1300 382 826, or emailing us, for solutions to all your mould issues. Our professional mould removal service will expertly identify the source of the mould growth, remove existing mould from the affected area and then prevent further proliferation of mould.
Our business is family owned by father and son - John (0409 191 209) and Daniel (0409 022 422).
We are experts in the field of mould identification and remediation and our aim is to provide you with honest, realistic and practical advice and assistance if you have an issue relating to mould. We can identify and remediate mould growth, test the indoor air for mould spores and determine the cause of the mould generation – and most importantly, treat the area and the cause of the mould so there will be no return. Guaranteed.
We can also advise you on how to safely and easily remove mould yourself.
Why mould is present in your property
Mould is always caused by excessive moisture in the indoor environment. This excessive moisture is always caused by one or both of the following:
1. Water ingress
Water ingress will come from any of the following - burst pipe, flood, overflow in a bathroom or laundry etc.. Water ingress leading to mould growth can also invade a built environment if external walls have a lack of waterproofing but this is not generally responsible for an outbreak of mould growth.
2. A lack of ventilation
If a dwelling lacks adequate ventilation, then the moisture created by those who occupy the environment through everyday occurrences like washing, drying clothes, breathing, cooking etc becomes trapped in the building. Once it is trapped the moisture will come into contact with mould spores (as part of household dust) and mould growth will form.
This is very common in wet areas like bathrooms, laundries and kitchens where mould problems often persist.
This moisture commonly manifests itself as condensation. Accordingly, both the cause of the excessive moisture (water intrusion or a lack of ventilation) and the end result of the excessive moisture (mould, condensation formation) need to be treated at the same time, if the end goal is to permanently rid the building of mould and condensation.
The mould remediation or treatment process consists of four parts, all of equal importance. These are as follows:
INSPECT - The initial mould inspection will reveal the visible mould growth, the level of mould spores (invisible mould) and the reasons for the mould generation (moisture intrusion and/or lack of ventilation). From the initial inspection we can determine the correct action to rid the property of both the causes of the mould generation and the mould generation itself.
CLEAN - The mould cleaning process involves hand cleaning of the affected areas, air-scrubbing of the indoor air to remove mould spores and chemical cleaning via a process known as 'fogging' as a secondary but important cleansing of areas that may not be accessible by hand.
DRY - After the initial cleaning process, the property is dried using artificial heat (to assist with evaporation), dehumidification, artificial ventilation and air movement, all computer controlled via our Drymatic (pictured right).
VENTILATE - Once the drying process is complete, ventilation should be added (if required) to ensure no repeat of the mould generation. This is achieved by adding new or repairing existing passive vents, educating the residents on natural ventilation procedures and/or adding a forced mechanical ventilation system to the property.
For expert mould removal and remediation services in Melbourne, contact Mouldco today on 1300 382 826, or via email.
Inquire about our Property Inspection Service
20+ Years Experience
Family Owned Company
Specialised Cleaning and Drying Equipment
Specialised Equipment for Inspecting, Testing and Cleaning any Mould Problems
Inspect for Moisture & Damp
Thermal imaging cameras detect moisture and danp problems behind walls.
Inspection cameras can detect mould and rising damp in areas that may not be accessible.
Penetrative and non penetrative moisture metres can detect moisture and damp on wall surfaces and inside wall cavities.
Drying Moisture & Rising Damp
Our purpose built trailers are the most powerful drying facilities in Australia.
Fast drying is one of the most important equirements for effective mould removal.
Large heaters dry out wet sub floor spaces quickly. Our trailer mounted heating units are the fastest drying units in the country.
Cleaning & Removing Mould
Our company specialises in mould remediation using the dry ice blasting method.
HEPA filtered airscribers filter the internal air to remove mould spores.
Dehumidifiers and airmovers help remove humidity and moisture from the indoor environment.